Spanners on the Fen

Friday, 15 May 2020

YouTube Channel - 'spannersonthefen'

I have started a YouTube channel to experiment with making videos of some of the work I do on my Land Rover:

https://www.youtube.com/channel/UCJsiCcouRmUTX0EEgNamvmQ

Posted by scottonthefen at 01:13

Email This BlogThis!Share to X Share to Facebook Share to Pinterest

Newer Post Older Post Home

Statistics

5kg spool welding wire - 1
BOC Gas Cylinders - 1
Hours in garage 400
Cups of tea - 170
Cans of WD40 - 4 (then switched to 5L spray)
Visits to Hospital - 2
Canisters of propane/MAPP - 2

Blog Archive

▼ 2020 (10)
- ► November (1)
- ► September (2)
- ▼ May (2)
  - Door Hinge Refurb
  - YouTube Channel - 'spannersonthefen'
- ► April (3)
- ► March (2)

► 2019 (22)
- ► December (2)
- ► September (4)
- ► August (2)
- ► June (3)
- ► May (4)
- ► April (2)
- ► March (3)
- ► February (1)
- ► January (1)

► 2018 (23)
- ► December (4)
- ► November (3)
- ► October (1)
- ► September (3)
- ► August (1)
- ► June (2)
- ► May (4)
- ► April (2)
- ► March (1)
- ► January (2)

► 2017 (19)
- ► December (5)
- ► November (2)
- ► October (3)
- ► September (6)
- ► August (3)

Popular Posts

First Dumb Iron Repair

I've spent the last couple of days making a first attempt at a dumb iron repair. I was successful in that I've gone from a very rott...
Bush Removal Tool, Sump Removal

This weekend I managed to get all the front spring and chassis bushes out. I wound the chassis bushes out with a tool based on a piece of ...
BMI Heritage Certificate

I applied to the British Motor Industry Heritage Trust for Sandy's certificate of origin. The certificate confirms the chassis number lo...
First Weld - N/S Bulkhead Outrigger

I chose this is as my first weld job as the outrigger was so completely shot, almost any result would be an improvement! I had a practice ...
Front Fuel Tank Outrigger

There was hardly any wind today so I jumped on the last of welding for the year. Front fuel tank outrigger in place and painted. With the ra...
Electrics (1)

I recently made a start on my electrics checklist with a view to ensuring everything works before taking to the road. The front wings are st...
Swivel Refurb

Last week I set about replacing the same brake and hub parts on the front axle as I'd just replaced on the rear. All the inner and out...
Bush Removal and Spring Refurb Progress

When I came to remove the first chassis bush, I did try my luck with a hammer and cold chisel first but did not persevere too long. There wa...
Project Acquired - Series 2A Land Rover

On 30th July 2017 I paid a deposit on this 1969, H reg, Series 2A Land Rover: ...
Front Leaf Spring Refurb Done

I am now in a position to put the front axle and suspension back together. The shock absorbers seemed ok so I rubbed them down and painted...

Simple theme. Theme images by gaffera. Powered by Blogger.