Spanners on the Fen

Saturday, 23 June 2018

June 2018


Posted by scottonthefen at 00:12
Email ThisBlogThis!Share to XShare to FacebookShare to Pinterest
Newer Post Older Post Home

Statistics

  • 5kg spool welding wire - 1
  • BOC Gas Cylinders - 1
  • Hours in garage 400
  • Cups of tea - 170
  • Cans of WD40 - 4 (then switched to 5L spray)
  • Visits to Hospital - 2
  • Canisters of propane/MAPP - 2

Blog Archive

  • ►  2020 (10)
    • ►  November (1)
    • ►  September (2)
    • ►  May (2)
    • ►  April (3)
    • ►  March (2)
  • ►  2019 (22)
    • ►  December (2)
    • ►  September (4)
    • ►  August (2)
    • ►  June (3)
    • ►  May (4)
    • ►  April (2)
    • ►  March (3)
    • ►  February (1)
    • ►  January (1)
  • ▼  2018 (23)
    • ►  December (4)
    • ►  November (3)
    • ►  October (1)
    • ►  September (3)
    • ►  August (1)
    • ▼  June (2)
      • June 2018
      • Sump, Steering, Oil
    • ►  May (4)
    • ►  April (2)
    • ►  March (1)
    • ►  January (2)
  • ►  2017 (19)
    • ►  December (5)
    • ►  November (2)
    • ►  October (3)
    • ►  September (6)
    • ►  August (3)

Popular Posts

  • First Dumb Iron Repair
    I've spent the last couple of days making a first attempt at a dumb iron repair. I was successful in that I've gone from a very rott...
  • Bush Removal Tool, Sump Removal
    This weekend I managed to get all the front spring and chassis bushes out. I wound the chassis bushes out with a tool based on a piece of ...
  • BMI Heritage Certificate
    I applied to the British Motor Industry Heritage Trust for Sandy's certificate of origin. The certificate confirms the chassis number lo...
  • First Weld - N/S Bulkhead Outrigger
    I chose this is as my first weld job as the outrigger was so completely shot, almost any result would be an improvement! I had a practice ...
  • Front Fuel Tank Outrigger
    There was hardly any wind today so I jumped on the last of welding for the year. Front fuel tank outrigger in place and painted. With the ra...
  • Electrics (1)
    I recently made a start on my electrics checklist with a view to ensuring everything works before taking to the road. The front wings are st...
  • Swivel Refurb
    Last week I set about replacing the same brake and hub parts on the front axle as I'd just replaced on the rear. All the inner and out...
  • Bush Removal and Spring Refurb Progress
    When I came to remove the first chassis bush, I did try my luck with a hammer and cold chisel first but did not persevere too long. There wa...
  • Project Acquired - Series 2A Land Rover
    On 30th July 2017 I paid a deposit on this 1969, H reg, Series 2A Land Rover: ...
  • Front Leaf Spring Refurb Done
    I am now in a position to put the front axle and suspension back together. The shock absorbers seemed ok so I rubbed them down and painted...
Simple theme. Theme images by gaffera. Powered by Blogger.